cisco7609 ，72 mpls p和pe的qos配置连载

星福星

今天先贴个p设备的。。。。
hostname r1
!
boot-start-marker
boot-end-marker
!
!
memory-size iomem 5
no aaa new-model
ip subnet-zero
!
!
ip cef
!
!
no ip domain lookup
mpls label protocol ldp
mpls label rang 200 299
tag-switching tdp router-id Loopback0 force
no ftp-server write-enable
!
!
!
!
interface Loopback0
ip address 1.1.1.1 255.255.255.255
!
interface Loopback90
no ip address
!
interface Ethernet0/0
ip address 10.1.1.1 255.255.255.0
ip ospf network point-to-point
half-duplex
tag-switching ip
!
interface Ethernet0/1
ip address 10.1.2.1 255.255.255.0
ip ospf network point-to-point
half-duplex
tag-switching ip
!
interface Ethernet0/2
ip address 10.1.3.1 255.255.255.0
ip ospf network point-to-point
half-duplex
tag-switching ip
!
interface Ethernet0/3
ip address 10.1.4.1 255.255.255.0
ip ospf network point-to-point
half-duplex
tag-switching ip
!
interface Serial1/0
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/1
no ip address
shutdown
serial restart-delay 0
!         
interface Serial1/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/3
no ip address
shutdown
serial restart-delay 0
!
router ospf 1
log-adjacency-changes
network 1.1.1.1 0.0.0.0 area 0
network 10.1.0.0 0.0.255.255 area 0
!
router bgp 1
no au
no sy
no bgp default ipv4-unicast
bgp log-neighbor-changes
neighbor 2.2.2.2 remote-as 1
neighbor 2.2.2.2 update-source Loopback0
neighbor 3.3.3.3 remote-as 1
neighbor 3.3.3.3 update-source Loopback0
neighbor 4.4.4.4 remote-as 1
neighbor 4.4.4.4 update-source Loopback0
neighbor 5.5.5.5 remote-as 1
neighbor 5.5.5.5 update-source Loopback0
!
address-family ipv4
neighbor 2.2.2.2 activate
neighbor 3.3.3.3 activate
neighbor 4.4.4.4 activate
neighbor 5.5.5.5 activate
no auto-summary
synchronization
exit-address-family
!
address-family vpnv4
neighbor 2.2.2.2 activate
neighbor 2.2.2.2 route-reflector-client
neighbor 2.2.2.2 send-community both
neighbor 3.3.3.3 activate
neighbor 3.3.3.3 route-reflector-client
neighbor 3.3.3.3 send-community both
neighbor 4.4.4.4 activate
neighbor 4.4.4.4 route-reflector-client
neighbor 4.4.4.4 send-community both
neighbor 5.5.5.5 activate
neighbor 5.5.5.5 route-reflector-client
neighbor 5.5.5.5 send-community
exit-address-family
!
ip http server
ip classless
!
!
!
!
!
control-plane
!
!
line con 0
exec-timeout 0 0
logging synchronous
transport preferred all
transport output all
line aux 0
transport preferred all
transport output all
line vty 0 4